When beginning to sculpt my sculpture I used my samples to help me decide what thickness I wanted the metal strips to be. I began using long, thin strips and used tweezers to hold them in place, I also did this for assorted sheets of metal.
I then repeated this with thicker strips of metal, which I felt looked better. I then experimented with the positioning. Once I had all the pieces in the places were I liked them I used the piece of equipment that soldered the strips together to hold them in place. As the pieces needed to be touching for this to work, I decided to create a frame to suspend the sculpture in as it did not look right with all the pieces touching one another.
No comments:
Post a Comment